Compressed Air for Laser Cutting
Why use compressed air?
Using compressed air as your fuel for laser cutting has many benefits, not only do you already have this installed as standard but the cost to laser cutting is massively cheaper than any other fuel. Our compressor reach up to 15 bar which is required for laser cutting
Air compressors for laser cutters & Sheet metal machinery
ReddiAir are leaders in the supply and installation of compressed air equipment for laser cutters and laser cutting machinery. Our skilled specification technicians can provide advice and industry knowledge to guide you toward the right compressed air system for your laser cutter and laser cutting machinery. Call ReddiAir today for free, expert advice.
Saving
Did you know using compressed air is cheaper than any fuel based product.
Speed
Using compressed air can make cutting projects have reduced workmanship due to its speed.
Less pollution
Less fumes means a cleaner world. its why others have switched to compressed air.
About our range
Our chosen compressors are built to last, with many years of engineering to create the most diverse air compressors on the market.
Range Features
The all in one turn key solution you'll every need.
1 Permanent Magnet (PM) motor
● Reach IE4 efficiency standard
● Lubricant-cooled motor
● VSD: variable speed drive
● IP65 protection
2. New compressor airend
● New improved rotor profile
● R&D in Japan
● Designed to give many years of reliable operation
3. Inlet filter
● Nano scale Heavy duty
● filtration accuracy upto 99.9%
● Dust particles below 0.3 micron
● Pressure drop indicator
4. Vsd fan
● VSD control
● Compact
● Low noise level
● High capacity for optimized
cooling
● Low power consumption
5. Classic cooler fan
● Easy access for maintenance
● Paint anti-corrosion coating on
surface
● 30% oversized cooler design
6. Flux vector inverter
Wide voltage design
● Meets C3 and C3 EMC requirements
● IBuilt-in DC reactor
● Independent cooling air duct design
7. IT 7000 touch plc
● 7.0 inch full color touch LCD screen
● Real-time Operation/ Maintenance/ Alarm
information
● Operation record/ Chart display
● Weekly timer/Service history and planning
8. Inlet valve
● Optimizes the inlet flow of the air end.
● No blow-off losses / Large suction area
● Full aluminum design: maintenance-free.
● Fast check: prevent unloading and shutdown
oil injection
9. Oil filter
● High efficiency oil filter removes contaminants from the oil
● Oil particles can be controlled at 0.1 micron
● Ensures a smooth and well-lubricated oil system
7. Gas tank & built-in separation system
● Oversized air and oil tank improves the
cyclone effect maximising the separation process
● The high efficiency oil separator ensures that the
oil carry over is less than 3ppm
● System pressure loss is less than 0.02mpa
11. All-steel internal pipe system
● All steel internal pipe work and compression joints
are used to prevents leakage and premature ageing
often seen with flexible pipes
● Less pipe friction loss
Oil cooled permanent magnet all in one screw compressor
The high heat exchange efficiency design of the inlet and outlet temperature difference of 5 ℃ reduces the demand of cooling capacity to a low level and achieves a high energy efficiency ratio.The stainless plate heat exchanger is used to prevent the dryer itself from becoming a source of pollution and to achieve high quality compressed air.
Efficient heat transfer capacity and the use of environmentally friendly refrigerant R134a makes it especially be suitable for high temperature and high humidity environment. High-efficiency (99.9%) air-water separation structure is combined with a highly reliable automatic drainage device, to ensure that the condensate water was drained from the compressed air system timely and ef ficiently. Ultra-quiet refrigeration compressor,high reliability and long service life. The wind condenser uses nano anti-corrosion coating to improve heat-transfer performance.
High precision triple filter
Remove solid particles down to 0.01m,reach the maximum residual oil content of 0.01ppm and provide high quality compressed air.
Large capacity air tank
The use of a large-capacity air tank can reduce the periodic pulsating airflow of the compressor exhaust,stabilize the pressure in the compressor air pipe, reduce the start frequency of the air compressor, protect the air compressor, and reserve air at the same time.
High performance
- Super Premium Efficiency APM Motor (IE4 equivalent)
- Oil-cooled motor.
- Fully enclosed lP65 protection.
- Reach lE4 efficiency standard.
- VSD: variable speed drive.
- Optimal cooling for all speeds and ambient conditions.
- Bearing free motor requires zero maintenance.
- UH series Permanent magnets resist to 180°℃
- F grade insulation and B grade temperature rise assessment.
- High temperature design prevents demagnetization.
What you pay should be only for what you use
SCR APM Series adopts a soft start system for its start-up. The Inovance VSD maintains full load current on start up to 1.5 times FLC- Traditional motor starters such as direct on line starters and star delta starters burden the power supply due to the high peak start up current which can typically be 8-10 times FLC. With variable speed soft start system, the starting current never exceeds the rated value
Special Dual Housing Oil Cooling Motor
- Super Premium Efficiency APM Motor (IE4 equivalent)
- Oil-cooled motor.
- Fully enclosed lP65 protection.
- Reach lE4 efficiency standard.
- VSD: variable speed drive.
- Optimal cooling for all speeds and ambient conditions.
- Bearing free motor requires zero maintenance.
- UH series Permanent magnets resist to 180°℃
- F grade insulation and B grade temperature rise assessment.
- High temperature design prevents demagnetization.
Special morse connection
PM motor rotor is directly mounted on the airend shaft, No gears or belts, no coupling, Zero transmission loss, Easy for installation, No need to make adjustment, Better protection for inner parts of PM motor. There's no bearing for the PM motor, so motor is 100% free maintenance, Reduce maintenance cost.
Double Frequency conversion system
Constant pressure output:
A significant energy-saving effect can be achieved by constant pressure control Pressure fluctuation can be controlled within士0.01MPa.
Constant temperature output:
Normally the temperature is set at 81℃,ensure the best lubrication performances while avoid the sudden stop caused by haigh temperature.
High performance
- On board RS485 communication
- Intelligent PID flow regulation mode
- Accurate torque control
- Fast response speed for system pressure
- Fast acceleration and deceleration characteristics
- Closed loop dynamic control and high precision control
- Constant pressure control avoids over generating site air pressure
Let's Build Your Compressed Air Package
Call Us Now
Birmingham: 0121 661 4412
Redditch: 01527 910 360
We are compressed air specialists covering the whole of the United Kingdom keeping businesses running
We are social
ABOUT US
Request a call back
COME VISIT US AT OUR HQ.
Our main head office is in Birmingham
Accreditations
